How the cost is worked out
A heater's watt rating tells you how fast it uses electricity. Divide by 1,000 to get kilowatts, multiply by the hours it runs, and you have kilowatt-hours (kWh), the unit on your bill. Multiply by your price per kWh and you have the cost.
Cost per day = watts ÷ 1,000 × hours × share of time at full power × price per kWh
Example at the U.S. average price. A 1,500 W heater running flat out for 8 hours uses 1.5 × 8 = 12 kWh a day. At 18.16¢ per kWh, that is $2.18 a day, about $66.28 a month and $329.06 over a full November-to-March season.
A smaller heater is not a more efficient one
Every electric resistance heater, whether it's ceramic, oil-filled, infrared or a fan coil, turns close to 100% of the electricity it uses into heat. A 750 W heater costs half as much per hour as a 1,500 W heater because it makes half as much heat. Labels that promise an "energy-saving" plug-in heater are describing a thermostat or a timer, not a better way of making heat.
What changes the bill is how long the heater runs and how much space it has to warm. A heater that cycles off in a small closed room costs far less than the same heater losing a battle with a large, drafty one.
When a space heater saves money, and when it doesn't
Per unit of heat, electricity is usually the most expensive way to warm a home. At this month's U.S. average price, heat from a plug-in heater costs about $53.22 per million Btu. The same heat from a 95%-efficient gas furnace at the 2025 average residential gas price costs about $15.57.
A space heater still comes out ahead when it lets you turn the whole-house thermostat down and heat only the room you are using. If the furnace keeps running at the same setting while the heater runs too, you are paying for both. The thermostat setback calculator shows what turning the main system down is worth.
Questions
Does a 1,500 W heater use 1,500 W the whole time?
Only while the heating element is on. If the heater has a thermostat, it switches off once the room reaches the set temperature and back on as it cools. That's what the 'time at full power' field is for. A heater on its low setting usually draws about half its rated power.
How much does it cost to run a space heater overnight?
Eight hours of a 1,500 W heater at full power uses 12 kWh. At the U.S. average price that's $2.18. Pick your state above to see your own number.
Is an oil-filled radiator cheaper to run than a ceramic heater?
Not per hour at the same wattage. Oil-filled radiators hold heat and release it slowly, so they can feel steadier and may cycle less often in a small room. The electricity used to make each unit of heat is the same.
Can I plug a space heater into an extension cord?
Fire-safety agencies advise plugging heaters straight into a wall outlet, not into extension cords or power strips, because a heater pulls a high current for hours at a time. Keep it at least three feet from anything that can burn.
Sources
- Electricity prices: U.S. Energy Information Administration, Electric Power Monthly, Table 5.6.A, August 2026 (2026 values are preliminary).
- Natural gas prices: U.S. Energy Information Administration, Natural Gas Prices, average residential price (annual), 2025.
- Typical heater wattage (portable heaters 750 to 1,500 W): U.S. Department of Energy, Estimating Appliance and Home Electronic Energy Use, as republished by Virginia Cooperative Extension (BSE-301).
Prices last updated November 17, 2026 from EIA data. Reviewed by the Kilowatt Almanac editor. Found a mistake? Tell us and we will fix it.